Post by syd146 on Sept 8, 2009 6:35:23 GMT -5
I find myself in a desperate situation with no backup (thats why I was running a raid setup, for redundancy). With 600 GB missing I feel lost.
My system is running Vista 32 and using a Revo64 - 3 drive setup.
Everything was working fine last night, but when I booted up this morning I noticed I was missing a drive ( I also have a non-array drive so was able to boot to Vista). Upon rebooting the NetCell screen showed the message No Array.
In BIOS setup it shows no drive problems, but no arrays.
BIOS is 1.7.6.1
No Faults on drive 0,1 or 2
Had # on Drive 1 for Partial Array
Drive 0,1 and 2 are listed as U for unassigned
A0 is listed as Array not Defined
A1 is also listed as Array not Defined
In the menu I have options for:
1. Create Array
2 Delete Array
3 Interupt 13 (now diabed)
4 Reset Configuration
5 Save and Exit
6 Exit
Any help or suggestions would be appreciated, before I resort to a hammer. I know it will not fix the problem, but it will alleviate some stress.
My system is running Vista 32 and using a Revo64 - 3 drive setup.
Everything was working fine last night, but when I booted up this morning I noticed I was missing a drive ( I also have a non-array drive so was able to boot to Vista). Upon rebooting the NetCell screen showed the message No Array.
In BIOS setup it shows no drive problems, but no arrays.
BIOS is 1.7.6.1
No Faults on drive 0,1 or 2
Had # on Drive 1 for Partial Array
Drive 0,1 and 2 are listed as U for unassigned
A0 is listed as Array not Defined
A1 is also listed as Array not Defined
In the menu I have options for:
1. Create Array
2 Delete Array
3 Interupt 13 (now diabed)
4 Reset Configuration
5 Save and Exit
6 Exit
Any help or suggestions would be appreciated, before I resort to a hammer. I know it will not fix the problem, but it will alleviate some stress.